In contrast to most manufacturers, unlike the use of IPs 192.168.1.1 or 192.168.0.1, some manufacturers use IP address 192.168.30.1 to access the router’s capabilities. If you have such a modem and are using this IP address to reach the pre-router, then this article is right for you.
Here, you will come to know everything that you need to know about this IP address including how to login to it and how to reset your username and password in case you forget them.
Requirements for 192.168.30.1 IP Address?
There are some requirements that we must follow to log in to this IP address and make necessary changes. To be most important to be around the router’s network or just to keep it, we need to be connected to the same network of the router to make the required changes in the firmware because it is a private IP address.
The most significant disadvantage of this IP address is that you can not find this page on the (WWW) Website and you should be around your router, whatever is located. The second requirement is that you should have a device that supports HTML5 in the browser, which covers a lot more to all the devices currently available. You do not have to worry about this.
How To Login 192.168.30.1 IP Address
Step 1 – At first, type this 192.168.30.1 IP Address on the URL bar of your browser.
Step 2 – When you have entered the address, you will come to a page and prompted to enter username and password. Enter the default username and password.
Step 3 – Now you will get authentication, and you will get access to the different options for the firmware update, security management and more.
Step 4 – If you found something unpleasant, It is perhaps because of wrong IP Address. I would suggest you retype the IP Address or simply copy it from here.
Default Usernames and Passwords List
| Device | Username | Password |
|---|---|---|
| Huawei | admin | admin |
| Eminent | admin | admin |
| 3JTech 3G | admin | admin |
| NEXX WT3020 | admin | admin |
| GIGAFAST EE400-R | blank | admin |
| Medialink MWN-WAPR300N | admin | admin |
| Adaptec AWN-8084 | admin | not set |
What To Do If You Cannot log in To Your Router?
Since 192.168.30.1 is the default IP address for most routers, it is also essential to note that 192.168.30.1 might not just be the login address for your router. Some routers also have different IP addresses that you can find on the Internet. If 192.168.30.1 does not work for your router, there is no need to panic. There might be the following possibilities for the login failure.
- 192.168.30.1 is not the IP address for your router.
- The router might not be appropriately connected with the LAN wire. Fix the cable tightly with the router to get it up and running, and try again.
- There might be a firewall filtering that has been allowed to pass through your router. Check your firewall settings and deselect the same, as this can hamper the login process.
- Check if your router is properly on. You can restart your router again and try to log in.
Conclusion
This article will help users, but this article is suitable for new users. If you search for keyword 192.168.30.1, and wireless settings online, you will not find any better articles than this. In the Router Manual, you will get the necessary information. You can use other websites to learn more about router and Wi-Fi settings. Thanks for reading this article. If you need any help, please comment below.
Leave a Reply